UNIQUE DESIGN: Silencer groove, reduce vibration and noise, Smooth Cutting, High Hardness Carbide Tip, provide a longer service life. TCG Design,Triple Chip Grind includes a 15-degree hook angle. HIGH QUALITY CARBIDE MATERIAL: Provide the best cutting experience, with good cutting performance. Prolong the service life of CircularnSaw Blade, and add the sharpness. WIDELY USE: Ideal for cutting Aluminum plate, extrusion, angle, tubing, and other non-ferrous Materials. FIT SIZE: 12 "100 Tooth aluminum circular miter saw blade. Diameter: 12-inch. Arbor Diameter: 1 inch. USER GUIDE: The equipment should be equipped with safety protection device. When not in use, hang the miter saw blade away from the damp place to prevent rust.
Product Description
The Golden Rule Of Blade Selection
For every design choice, there are pros and cons, and more teeth is not always better. More teeth also means more friction and heat, more resistance to the saw, slower feed rates, and a higher chance of burning on some materials. Inversely, fewer teeth tend to mean faster more efficient cutting, but usually also means a rougher cut.
COMOWARE ATB Finishing & Trimming Circular Saw Blade
10” - 80 Tooth 5/8“ Arbor Alternate Top Bevels are ideal for severing wood grains in cross cut The versatility of the ATB grind makes it a very common grind on many types of blades, especially woodworking blades. The bevel helps reduce tear-out on cross-grain and plywood cuts, is reasonably durable, and can still be fairly efficient at ripping with the grain. Essentially the steeper the bevel angle, the less tear out the teeth will cause but also becoming increasingly less efficient at ripping as the bevel increases.
A gullet is the space between the teeth on a saw blade. One of the reasons a saw blade with fewer teeth will cut faster is that there is more gullet space in front of each tooth, which allows for better chip removal.
Laser-cut expansion slots help channel heat build-up during the cutting process, allowing the blade to expand and contract without distorting and destroying the tension of the blade’s body.
A positive hook angle (forward) will have more pull on the material than a low or negative hook blade, which is a feature best suited for ripping operations on a table saw. Material Carbide Corundum, Alumina Oxide, Hard Bond High Carbon Steel High Carbon Steel (65Mn) Size 7 1/4" 4 1/2" 1-3/4'' 9"
Returns Accepted for this item if it's within 30 Days